SPRAY TECHNIQUE
ADVISORY
If spraying with an HVLP spray
system is new or unfamiliar to you, it is
strongly advisable to practice on a piece of
cardboard or wood offcuts before proceeding
on your intended workpiece
Position the Spray Gun perpendicular to one or more
inches from the spray surface.
NOTE
The closer the sprayer is to the object
being sprayed the lower the overspray.
Spray parallel to the surface with smooth passes at a
consistent speed as illustrated below. Adhering to this
will avoid irregularities in the final finish.
Always apply a thin coat of material on the first pass
and allow to dry before applying a second, slightly
heavier coat.
Keep stroke smooth and at an even speed.
ADVISORY
When spraying, always trigger
the spray gun after spray pass has begun and
release the trigger before stopping the pass.
NOTE
Always keep the spray gun pointed
squarely at the spray surface and overlap
passes slightly to obtain the most consistent
finish.
Light Coat
Light Coat
Heavy Coat
Even Coat throughout
1 -12
inches
7
