EN
7
WWW.VONROC.COM
2. MACHINE INFORMATION
Intended use
This appliance is designed for blowing air for clean-
ing jobs, inflating car tires, bicycle tires, inflatable
mattresses, sport balls and etc. in conjunction with
the supplied adapter. The appliance is not designed
for continuous operation.
TECHNICAL SPECIFICATIONS
Model No.
CR501AC
Voltage
220-240 V~
Frequency
50 Hz
Motor power
1100 W
Operating mode
S3 15% -10 min*
Idling speed
3750/min
IP Class
IP 20
Air intake
180 l/min
Max. outlet pressure
8.0 Bar
Weight
4.9 kg
Sound power level
97 dB (A)
* S3 = intermittent operation without the impact of the
start-up. This means that during a period of 10 min-
utes, the maximum operating time is 15% (1.5 min).
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Quick coupler air outlet
2. Accessory compartment
3. Carrying handle
4. Switch
5. Electricity cable
6. Quick coupler
7. Connector
8. Air gun
9. Manometer
10. Release valve
11. Trigger
12. Extension nozzle
13. Hose with air coupler
14. Air hose
15. Ball needle
16. Universal adapter small
17. Valve adapter
18. Universal adapter
19. Nozzle adapter for the nozzle set
20. Nozzle set
3. OPERATION
For household use only.
The appliance vibrates during operation.
During operation, always put it down
backwards on its rubber feet.
Connecting the device to an outlet (Fig. A)
1. Open the cover and take out the air hose (14)
and required accessories from the storage
compartment (2).
2. Make sure the ON/OFF switch (4) is in the posi-
tion ‘O’ (switch off).
3. Connect the electricity cable (5) to an outlet.
Before using the machine, make sure that
the mains voltage complies with the specifi-
cations on the rating plate. Long supply
cables, extensions, cable reels etc. cause a
drop in voltage and can impede motor start
up.
The appliance vibrates during operation.
During operation, always put it down
backwards on its rubber feet.
On/Off switch (Fig. A)
• Move the ON/OFF switch (4) into the position ‘I’
to switch the appliance on.
• Move the ON/OFF switch (4) into the position ‘O’
to switch the appliance off.
The appliance is not designed for continu-
ous operation. To prevent the motor from
overheating, the appliance may only be used
as follows: Within a period of 10 minutes,
the appliance may only be operated for 15%
of the period so 1,5 minute. During the rest
of the period (8.5 minutes) the appliance
needs to cool down again.
Connecting the air gun (Fig. B1)
• Insert the connector (7) of the air gun (8) into
the quick coupler (6) on the air hose. When
pushing, the connector clicks into place to
secure the air gun.
