VONROC HA502AC, Original Instructions Manual

EN

9

WWW.VONROC.COM

Spoon reflector nozzle (15)

Distributes air around the material for example 

when soldering pipes

Scraper (16)

The scraper can be used for stripping paint and 

varnish on straight surfaces, 90° corners and round 

corners.

 Avoid collecting paint on the scraper 

accessory, as it may ignite. If necessary, 

carefully remove paint debris from the 

scraper accessory using a knife.

4. MAINTENANCE

 Always disconnect the apparatus before 

carrying out inspection or cleaning. Never 

use water or other liquids to clean the 

electrical parts of the hot air gun.

•   Never use easy inflammable liquids for cleaning 

the hot air gun, especially for the mouthpiece.

•   Regular maintenance of your hot air gun prevents 

unnecessary problems. Keep the ventilation slots 

of the hot air gun clean to prevent overheating.

Troubleshooting

In case the hot air gun does not work well, we give 

you subjoined some possible causes and their 

solutions.

 •

The engine gets overheated.

 •   The ventilation slots of the hot air gun are dirty.

Clean the ventilation slots.

•  The hot air gun does not start when it is  

  switched on.

 •   Interruption in the electrical circuit.

Check the mains lead and the mains plug.

 •   The switch is defective.

 Pull the mains lead out of the wall socket, be-

cause there is a chance of fire risk! Have the hot 

air gun repaired at your local dealer.

•  The engine does not work, but it does heat.

 •   Interruption in the electrical circuit.

 Pull the mains lead out of the wall socket,  

because there is a chance of fire risk! Have the 

hot air gun repaired at your local dealer.

ENVIRONMENT

Faulty and/or discarded electrical or 

electronic apparatus have to be collected at 

the appropriate recycling locations. 

Only for EC countries

Do not dispose of power tools into domestic waste. 

According to the European Guideline 2012/19/EC 

for Waste Electrical and Electronic Equipment and its 

implementation into national right, power tools that 

are no longer usable must be collected separately 

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest 

quality standards and are guaranteed free of 

defects in both materials and workmanship for the 

period lawfully stipulated starting from the date of 

original purchase. Should the product develop any 

failure during this period due to defective material 

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this 

guarantee:

•   Repairs and or alterations have been made 

or attempted to the machine by unauthorized 

service centers;

•  Normal wear and tear;

•   The tool has been abused, misused or  

improperly maintained;

•  Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other 

warranties expressed or implied which extend 

beyond the face hereof, herein, including the im-

plied warranties of merchantability and fitness for 

a particular purpose. In no event shall VONROC be 

liable for any incidental or consequential damages. 

The dealers remedies shall be limited to repair or 

replacement of nonconforming units or parts.

The product and the user manual are subject to 

change. Specifications can be changed without 

further notice.