VONROC OS502AC, Original Instructions Manual

WWW.VONROC.COM

4

1.  SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional 

safety warnings and the instructions. Failure to 

follow the safety warnings and the instructions may 

result in electric shock, fire and/or serious injury. 

Save the safety warnings and the instructions for 

future reference.

The following symbols are used in the user  

manual or on the product:

Read the user manual.

 Denotes risk of personal injury, loss of life or 

damage to the tool in case of non-observan-

ce of the instructions in this manual.

 Risk of electric shock.

 Wear safety goggles. 

Wear hearing protection.

Wear a dust mask.

 Class II machine - Double insulation -

You don’t need any earthed plug.

 The product is in accordance with the 

applicable safety standards in the European 

directives.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all 

instructions.

Failure to follow the warnings 

and instructions may result in electric 

shock, fire and/or serious injury.

Save all warnings and instructions for future 

reference.

The term “power tool” in the warnings refers to 

your mains-operated (corded) power tool or batte-

ry-operated (cordless) power tool.

1)  Work area safety

a)  

Keep the work area clean and well lit. 

Cluttered 

or dark areas invite accidents.

b) 

 Do not operate power tools in explosive atmos­

pheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create 

sparks which may ignite the dust or fumes.

c) 

 Keep children and bystanders away while ope­

rating a power tool.

 Distractions can cause you 

to lose control.

2)  Electrical safety

a)  

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools.

 Unmodified plugs and matching outlets 

will reduce risk of electric shock.

b)  

Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c)  

Do not expose power tools to rain or wet condi­

tions. 

Water entering a power tool will increase 

the risk of electric shock.

d)  

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts. 

Damaged or entangled cords 

increase the risk of electric shock.

e)  

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk 

of electric shock.

f) 

 If operating a power tool in a damp location 

is unavoidable, use a residual current device 

(RCD) protected supply.

 Use of an RCD reduces 

the risk of electric shock.

3)  Personal safety

a)  

Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication. 

A moment of inattention while operating power 

tools may result in serious personal injury.

b) 

 Use personal protective equipment. Always 

wear eye protection.

 Protective equipment 

such as dust mask, non-skid safety shoes, hard 

hat, or hearing protection used for appropriate 

conditions will reduce personal injuries.

c)  

Prevent unintentional starting. Ensure the 

switch is in the off­position before connecting 

to power source and/or battery pack, picking up 

or carrying the tool. 

Carrying power tools with 

your finger on the switch or energising power 

tools that have the switch on invites accidents.

d) 

 Remove any adjusting key or wrench before 

turning the power tool on. 

A wrench or a key left