background image

2

SAFETY INSTRUCTIONS

WARNING

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE.

SAFETY SYMBOLS

WARNING

THE FOLLOWING SAFETY SYMBOLS MAY APPEAR ON THIS PRODUCT. PLEASE ENSURE 

YOU UNDERSTAND THEIR MEANINGS BEFORE OPERATING THIS APPLIANCE IN ORDER TO 

PREVENT PERSONAL INJURY AND AVOID DAMAGE TO THE APPLIANCE. 

INSTRUCTION 

MANUAL

Read and 

understand

 

ROTATING BLADES

Do not reach into the 

container while the machine

is running.

HOT 

SURFACES

Moving parts may 

become hot with 

extended use.

Keep hair, loose clothing, fingers and all 
parts of body away from openings and 
moving parts.
Never operate the Mini Chopper when 
empty.
Do not overload the Mini Chopper.
Do not add hot liquids or food to the 
Chopping Bowl to blend.
When using for the first time your Mini 
Chopper may give off a ‘new’ smell or 
vapour. This will dissipate after a few uses.
Never attempt to remove food or 
liquid from the Bowl while the Blade 
is still moving. Always allow it to stop 
completely.
Do not lift or move the Mini Chopper 
whilst in use.

Do not operate continuously for periods 
longer than those marked on the product 
or indicated in the instructions.
Handle the Blade/Blade Assembly with 
care when removing from the bowl.
Ensure the appliance is switched off and 
unplugged before changing accessories 
or cleaning.
Do not wash the Blades in a dishwasher 
as they are not dishwasher-safe.
Do not lubricate any parts or carry out any 
maintenance or repair work other than 
that shown in this manual, or as advised 
by the DOMU Brands Customer Care 
Helpline.
Use only as described in this manual 
and with DOMU Brands recommended 
attachments only.

Summary of Contents for 2000068











Reviews: