3. How to select TC/VW modes:
While the device is on, thread your tank system to the device. The screen will
light up and show “SELCOIL” as well as the coil resistance below it. Use the
+ or – buttons at the bottom of the device to move through the different
selections. There are 5 different settings to choose from:
·
PREV – which can be used if you have already used that coil on the
device
·
NI – If you are using an Ni200 coil
·
TI – if you are using a Titanium coil
·
SS – If you are using a Stainless Steel coil (316L recommended)
·
W – If you are using a Kanthal coil (such as the supplied VTPC coil)
or SS coils
