- 6 -
the dome or Pan/Tilt is out of control, probably the protocol adopted doses not support line scanning
7.1.14.
open the assistant function
z
press:
FUNC
z
press number:
“1-10” different # stands for different function, refer to the Table 1
z
press
ON
Table 1
（
if the function is out of control, probably such protocol is not support such operation
）
KEYBOARD OPERATION
NUM CONTROL
OBJECT
FUNC+N+ON FUNC+N+OFF
0
Camera Power Supply/Reset
On/ Off Switchable
Back to the Initial
Value of the Camera
1 Backlight
Compensation
On
Off
2
Zero Lux
（
refer to camera function
）
On Off
3
Menu/Screen
（
refer to camera function
）
On Off
4 Digital
Magnification
On
Off
5
Background Light of Sreen
On
Off
6 Focus
Auto
Manual
7 Iris
Auto
Manual
8 Auto
Manual
9 Indoor
Outdoor
10
White Balance
ATW
One Push WB
7.1.15.
close the assistant function
z
press:
FUNC
z
press:
“1-10” the function of different number refer the Table 1
z
press:
OFF
7.1.16.
control of dome / Pan/Tilt
Move the joystick until the camera reaches desired position. To reach the fastest spin of camera, move the
joystick utmost from center.
Twist the joystick
clockwise to zoom in and counterclockwise to zoom out.
7.1.17.
the operation of keyboard menu
Press MENU to enter menu press again to exit menu. After enter the menu, move the joystick up or down to
move the cursor up or down; move the joystick left or right to adjust the content of current menu. If the option
of PASSWORD is ON, the screen will display: ENTER PASSWORD:[ ], to tip user input the 6-digit
password; If the option of PASSWORD is OFF, press MENU, to enter the MAIN MENU directly:
