VopTel Technology Co., Ltd
Page 40/67
Name
Description
CRBT
CRBT stands for Color Ring Back Tone. Set if CRBT is activated, that is,
provide prepared audio package as ringback tone. Note: it is required to set
the CRBT file download platform. This is not selected by default.
VG1X and M100 support two CRBT storage modes: on-system (stored in a
flash memory) and run-time download (from FTP server). The capacity of
both modes are described as follows:
On-sytem:
z
VG1X: No more than 20 seconds in G.729 format (fring1.dat)
z
VG53X,VG54X: Up to 20 tone files, a maximum of 400 seconds in G.729
format or 50 seconds in G.711 format.
Run-time download:
z
VG1X/VG53X,VG54X: Up to 20 tone files, a maximum of 10000
seconds in G.729 format or 1250 seconds in G.711 format.
Note:Tone files are stored in the flash memory and the gateways
automatically download the tone files from FTP server after power on.
CRBT ID
Set the CRBT number with a valid rang of 0~255, where 0 indicates
disabling CRBT. The default value is 0.
Speed dials
Select if the Speed dials is activated on this line. By default, this is not
selected.
Speed dial list
If the Speed dials is activated on this line, enter the speed dials list.
The abbreviated number consists of max 30 pairs of “abbreviated
number-real number” with an minus sign between them; “abbreviated
number-real number” pairs are separated by “/”; the value range of
abbreviated number is 20 ~ 49. For example:
20-61202700/23-13052475522/30-96961. Users can set the list on a
telephone set and display it here.
Call forwarding
Select if Call Transfer is activated on this line. By default, it is not selected.
CFU
If it is required to forward all incoming calls unconditionally, enter the new
destination number here.
CFNR
If it is required to forward an incoming call when there is no answer, enter
the new destination number here.
CFB
If it is required to forward an incoming call when it is busy, enter the new
destination number here.
Forking
Select if the Forking is activated. Forking allows the gateway to initiate a
call to another telephone terminal while ringing on this line terminal, and the
answer by either terminal will end up with ringing of the other terminal.
Forking number
If forking of this line is activated, set a number for the second ringing
terminal here. The ringing terminal can be another port of gateways or an
external terminal such as mobile phone.
Release control
by caller
Select if the call release is controlled by the caller. By default, this is not
selected.
z
Selected: The gateway will immediately release the call upon caller
hanging up; the gateway will not release the call as long as the caller is
still off until timeout (60 seconds by default);
z
Unselected: The gateway will immediately release the call upon either
party hanging up the call.
Call waiting
Select if Call waiting is activated on this line. By default this is not selected.
CID on call
waiting
Select if Caller ID Display is activated on this line during call waiting. By
default, this is not selected.
