Alias
Set alias. This is optional config item. If you don’t set Alias, it will
show no alias.
Note: There are four types of aliases.
1) add: xxx, it means that you need dial xxx in front of gateway number, which will reduce
dialing number length.
2) all: xxx, it means that xxx will replace some gateway number.
3) del: It means that gateway will delete the number with length appointed.
4) rep: It means that gateway will replace the number with length and number appointed.
You can refer to the following examples of different alias application to know more how to use
different aliases and this dial rule.
Suffix
Set suffix, this is optional config item. It will show no suffix if you
don’t set it.
Set delete length. This is optional config item. For example: if the
Delete Length
delete length is 3, the gateway will delete the first 3 digits then send
out the rest digits. You can refer to examples of different alias
application to know how to set delete length.
Introduction of how to set up dial-peer to implement switch between multi- SIP lines
9T mapping: If you have registered a Public SIP server and set dial-peer according to the above
table
，
all calls will be sent via public server when you press the numeric key “9” in front of
dialing destination gateway numbers.
8T mapping: If you have registered a Private SIP server and set dial-peer according to the
above table
，
all calls will be sent via private server when you press the numeric key “8” in
front of dialing destination gateway numbers.
*T mapping: If you have registered lifeline function and set dial-peer according to the above
table, all calls will be sent via PSTN line when you press the key “*” in front of dialing
destination gateway number.
Examples of different alias application
You
need set gateway
number,
Destination, Alias and Delete Length.
Gateway
number
is XXXT,
Destination is 255.255.255.255 and
Alias is del.
This means any gateway No. that
starts with your set gateway number
will be sent via SIP2 line after the
first several digits of your dialed
gateway number are
deleted
according to delete length.
This setting will realize speed dial
function, after you dialing the
numeric key “2”, the number after all
will be sent out.
If you dial “93333”,
the SIP2 server will
receive “3333”
When you dial “2”,
the SIP1 server will
receive 33334444
30
Summary of Contents for VG2020
Page 1: ...VG2020 Version V1 6 80 20 ...
