10
English
Note: Hang product from sturdy location using large screws that will
support product. Be careful not to hang the product in such a way
that it prevents normal fan operation or damages the cord. Keep the
electrical cord safely routed to avoid being tripped over or pulled.
Avoid placing the product where it could be easily bumped.
HOW TO USE
WALL MOUNT INSTALLATION
1. Locate the Key Holes (A) on the back of the product.
2. Find and mark two circles on the wall where the product
will be mounted. The circles need to be 5” apart from
center to center.
NOTE: Is it recommended to mount the EXO51 on a solid
surface or wall stud. Do NOT hang the product on the
ceiling. Use drywall anchors if a stud is not available.
3. Drill 2 #10 panhead screws into the wall (screws not
included). Screws should be weight rated for 10 lb vertical
load each.
4. Leave about ¼” of each screw exposed.
5. Place the wide portions of the Key Holes over the heads
of the 2 screws.
6. Slide the product down until the screws are inside the
narrow portion of the key holes and the product is
secured to surface.
A
