English
11
Care and Maintenance
Because your Flippi moves a substantial amount of air, it
will need regular cleaning. To clean, follow these simple
instructions:
1
.
Unplug the unit.
Note:
Do not use gasoline, thinners, solvents or
other chemicals for cleaning
.
2.
Wipe off with a soft cloth, or vacuum the outside sur-
faces. The fan has no user serviceable parts inside and
cannot be opened for cleaning. The motor is perma-
nently lubricated and requires no oiling.
How To Use
ON or OFF, press the Power Button (D). To switch between the 3 fan speeds,
press the Fan Speed Button (E). To turn oscillation ON or OFF, press the
Oscillation Button (F).
Note:
Flippi will resume operation with the previous
settings next time it is powered ON with the Remote.
Remote Control Battery
The remote control comes with a 3 Volt lithium
coin cell battery (CR2032). To install, remove the battery cover on the bottom
of the remote control. Remove any plastic protection from the battery and
place it in the remote with the + side facing out. Then reposition the cover
onto the bottom of the remote. If your remote does not work, please try
replacing with a new 3 Volt CR2032 battery.
