23. Use a Torque wrench and 12mm socket
to torque the FOOTNUT to 55in.lbs without
loctite.
24. Apply a fresh drop of blue 243 loctite to
the set screw and torque to 8in.lbs using a
1.5mm Allen key. Ensure the set screw is
aligned so that it contacts the flat portion of
the adjuster shaft.
25. Using a syringe or graduated cylinder
add 20wt suspension fluid as per the
following table.
REQUIRED OIL QTY
Fork
20wt Suspension Fluid
(mL)
PIKE
100
LYRIK
110
FOX 36
110
Note: Rockshox 0W30 oil is an acceptable
substitute. A lighter fork oil (10wt or 5wt)
may be substituted for cold weather riding
(below freezing temperatures).
26. Use a Torque wrench and 28mm
chamferless socket to torque the TOPCAP
to 220in.lbs (for FOX) 250in.lbs (for
ROCKSHOX) without loctite.
Installation is complete.
Now go ride your bike!
13
Summary of Contents for Smashpot
Page 1: ...Installation Instructions REV C 1...
Page 3: ...KIT CONTENTS Figure 1 Kit Contents 3...
Page 5: ...5...
Page 11: ...11...