6. Install the SPRING PERCH and SPRING
COLLAR onto the INNER TUBE and tighten
down until 8-10mm of threads are exposed.
7. Thread the TOPCAP onto the INNER
SHAFT ASSEMBLY
8. Use a Torque 28mm
chamferless socket on the TOPCAP and a
12mm Spanner on the SPRING COLLAR to
torque to
45in.lbs
without loctite.
DO NOT
EXCEED TORQUE SPECIFICATION.
**It is important that the SPRING COLLAR
be tightened against the TOPCAP. Do not
simply tighten the TOPCAP onto the INNER
SHAFT until the threads bottom out. This
will damage the assembly.
22. Use a Torque wrench and 28mm
chamferless socket to torque the TOPCAP
to 220in.lbs (for FOX) 250in.lbs (for
ROCKSHOX) without loctite.
For more information, visit vorsprungsuspension.com
18
Summary of Contents for Smashpot
Page 1: ...Installation Instructions REV C 1...
Page 3: ...KIT CONTENTS Figure 1 Kit Contents 3...
Page 5: ...5...
Page 11: ...11...
