SMASHPOT ASSEMBLY
1. Remove TOPCAP and SPRING COLLAR
from the INNER TUBE ASSEMBLY in order
to remove the SEAL HEAD and access the
TOP OUT SPRING SPACERS. Part
Number: 13-07-2-08
2. Install a stack height of TOP OUT
SPRING SPACERS as required to suit your
fork travel. TOP OUT SPRING SPACERS
must sit on the INNER TUBE between TOP
OUT SPRING ASSEMBLY and
SEALHEAD. See Drawing 2 and table
below for details. For example: a 160mm
travel fork requires 20mm of TOP OUT
SPRING SPACERS so install 2 x 10mm
spacers.
TOP OUT SPRING SPACERS
Fork Travel
(mm)
Spacer Stack Height
(mm)
130
50
140
40
150
30
160
20
170
10
180
NONE
3. Re-install the SEAL HEAD onto the
INNER TUBE ASSEMBLY and insert the
INNER TUBE ASSEMBLY into the OUTER
TUBE ASSEMBLY.
6
Summary of Contents for Smashpot
Page 1: ...Installation Instructions REV C 1...
Page 3: ...KIT CONTENTS Figure 1 Kit Contents 3...
Page 5: ...5...
Page 11: ...11...
