background image

19  

18

 

1500

Rangef

 

inder

s

aFety

 

and

 p

recautiOns

Do not stare into beam or view directly without laser eye 
protection. Staring continuously into beam for prolonged 
periods of time could cause harm to your eyes. If used 
properly, this device is safe for your eyes and laser eye 
protection is not needed. 

•  Use the correct battery (CR2) and proper battery 
orientation. 

•  Do not look at sun.

•  Do not activate Menu or Measure buttons while aiming at 
eye or looking into objective lens. 

•  Do not disassemble.

•  Do not allow children to play with unit.

2120 West Greenview Drive
Middleton, WI 53562
service@vortexoptics.com

vip W

arranty

We build optics based on our commitment to your absolute 
satisfaction. That’s why our products are unconditionally 
guaranteed and we make this Very Important Promise to 
you—a Very Important Person. 

Rest assured that in the event your optic becomes damaged 
or defective, we will repair or replace it at no charge to 
you. If we cannot repair your optic, we will replace it with 
an optic in perfect working order and in  equal or better 
physical condition. Call us at 800-426-0048 for prompt, 
professional, and friendly service.

Visit www.vortexoptics.com for more information.

The VIP Warranty does not cover loss, theft, deliberate damage 
or cosmetic damage that does not hinder the performance of 
the product.

Summary of Contents for Ranger 1500












Reviews: