Vortex Ranger 1500, Manual

7  

6

1500

Rangef

inder

M

Ode

 s

electiOn

Your Ranger is factory set to the angle 
compensating HCD mode, yards, and 
medium brightness. For most users, these 
are the preferred settings.

To change modes, after the Ranger is 
powered up activate the Mode Selection 
by pressing and holding the Menu button 
for at least four seconds. Once the Mode Selection screen 
displays, release the button. 

As you progress through Mode Selection, you may exit at any 
time and save your settings by pressing and holding the Menu 
button for at least four seconds—the Ranger will then return 
to power-up condition.

s

et

and

 s

ave

 M

Ode

 s

electiOns

in

 3 s

teps

1. 

Choose between the 

HCD and LOS Modes.

After activating the Mode 
Selection, press the 
Measure button to toggle 
between the HCD and LOS 
displays. Press the Menu 
button to save your desired 
choice and move to the Yards/Meters selection 
screen.

2. 

Choose between 

Yards and Meters 
Display.

Press the Measure button 
to toggle between the 
Yards and Meters display. 
Press the Menu button to 
save your desired choice 
and move to the Brightness selection screen.

3. 

Choose the Brightness Setting.

Mode Selection

Display

Use the Measure 
button to toggle 
through each 
Mode Selection 
option.

Use the Menu 
button to activate 
the Mode Selection 
displays.

Choose Between HCD and LOS 

Choose Between Yards and Meters