Vortex Ranger 1500, Manual

9  

8

1500

Rangef

inder

r

anging

With the Ranger 1500 powered up, position the crosshair on 
the target object and press and release the Measure button 
to get the distance measurement. If the laser is not able 
to range due to the reflectivity of the target, you will see a 
display similar to that shown here. To range a new target, 
simply re-aim and press the Measure button again.

To exit Mode Selection and save settings, press and hold the 
Menu button for four seconds. Settings will also save when 
Ranger powers down automatically.

Choose Between One of Three Brightness Settings 

No 
Reflectivity 
Displayed

HCD 
S

Can

LOS 
S

Can

The Ranger 1500 provides three illumination settings. Press 
the Measure button to toggle through the three Brightness 
settings. Press the Menu button to save your desired setting 
and move back to HCD/LOS selection screen.  

s

can

 r

anging

With the Ranger powered up, activate 
Scan Ranging by pressing and holding 
the Measure button down. A blinking “S” 
will appear in the lower left corner. 

Keeping the button depressed will 
continuously measure distance as you 
pan the crosshair back and forth across 
target objects. Releasing the Measure 
button will return laser to the Power Up 
Condition.