Vortex Razor 8.5x50, User Manual

Attaching  the  neckstrap

1. Starting with the right

barrel, push the right end
of the strap through the
right strap attachment
point. Push a workable
amount of strap through.

2. Loop the strap over 

the attachment point
and insert into the 
strap buckle.

3. Push the strap through 

the buckle. 

4. Secure the excess strap 

by putting it into the 
strap loop.  

5. Continue with the left 

side of the strap in the 
same manner as the right.
Your binocular strap is 
now secured, though you
may feel the need to 
adjust the strap to get the
best fit.

Note: if you wish to attach
the rainguard (the one-piece
eyepiece guard) to the strap,
push the strap through the
left slot of the rainguard 
before putting the strap through that side of the binoculars. 

Using  the  tripod  adapter

The Razor features a socket with a standard threading 
located between the two objective lens barrels for adapting your
binoculars to a 
tripod using a 
tripod adapter 
(both pieces sold
separately). Simply
unscrew the socket
cap and thread the
tripod adapter into
the socket.

6

7