V-400x Series Digital Clock
Operating and Installation Instructions
48x0 and w482 Time Code Synchronisation
The 400A, 400N and 400AP series digital clocks
can be configured to synchronise to 48x0 or
w482 time code from a suitable master clock
(supplied separately) as follows.
DCF and MSF Radio Time
Code Synchronisation
The 400A and 400N series digital clocks can be
configured to synchronise to DCF or MSF radio
time code when connected to either the 484.02
MSF Radio Receiver or 484.03 DCF Radio Receiver
(supplied separately) as follows..
Clock configuration
1
Press ‘Menu’ or ‘Up’ button to access clock
settings menu.
2
Press ‘+’ button until ‘Fu Sy’ is displayed
3
Press ‘Up’ button to access Synchronisation menu.
4
Press ‘+’ button until either ‘48x0’ or ‘482’ is
displayed.
5
Press ‘Up’ button to enter required w482 time zone
number (not required for 48x0).
6
Press ‘+’ button until required w482 time zone
number is selected (not required for 48x0).
7
Press ‘Up’ button to select either 48x0 or w482
synchronisation.
Clock configuration
1
Press ‘Menu’ or ‘Up’ button to access clock
settings menu.
2
Press ‘+’ button until ‘Fu Sy’ is displayed
3
Press ‘Up’ button to access Synchronisation menu.
4
Press ‘+’ button until either ‘DCF’ or ‘MSF’
is displayed.
5
Press ‘Up’ button to select DCF or
MSF synchronisation.
MOBA
Line
Time Code Synchronisation
The 400A, 400N and 400AP series digital
clocks can be configured to synchronise to
MOBA
Line
time code from a suitable master
clock (supplied separately) as follows.
Clock configuration
1
Press ‘Menu’ or ‘Up’ button to access clock
settings menu.
2
Press ‘+’ button until ‘Fu Sy’ is displayed
3 Press ‘Up’ button to access Synchronisation menu.
4
Press ‘+’ button until ‘MOBA’ is displayed.
5
Press
‘Up’
button
to
set
required
MOBALine/UTC offset.
6
Press ‘+’ button until required MOBALine/UTC
offset is displayed in minutes (positive or negative
offsets can be set).
7
Press ‘Up’ button to select MOBALine
synchronisation.
12
Issue 2.0
