Selecting the product model
The model is selected by setting the dip-switch 1
indicated in the figure as described in the table below.
Selecting the operating mode
Two-speed mode:
cut off the power supply
set the dip-switch SW2 indicated in
the figure:
Int.2=ON; Int.3=OFF
Int.4=OFF
Adjustable speed mode:
cut off the power supply
set the dip-switch SW2 indicated in
the figure:
Int.2=OFF; Int.3=OFF
Int.4=OFF
Setting the V1 and V2 values
The appliance leaves the factory with default nominal
settings V1=V
MIN
, V2=V
MAX
Values V1 and V2 can be adjusted as follows:
- cut off the power supply
- set the dip-switch SW2 indicated in
the figure:
Int.1=OFF
Int.4=ON
- restore the power supply. The motor automatically
runs at the V1temp speed
- use the trimmer (see figure)
to set V1temp to the desired
value, between V1nom and
the saved V2 – 100Rpm
- set Int.1=ON. This produces two
effects:
the V1temp value is saved as a
new V1;
the motor automatically runs at V2temp;
- use the trimmer (see figure) to set V2temp to the
desired value, between the saved V1 + 100Rpm and
Vmax;
- set Int.1=OFF. This produces two
effects: the V2temp value is saved
as a new V2;
the motor automatically runs at
V1temp
- cut off the power supply
- set Int.4=OFF to lock the V1 and
V2 values
Restoring nominal values
If necessary, the nominal factory-set values for V1 and
V2 can be restored using the following procedure:
- cut off the power supply
- set the dip-switch SW2 indicated in
the figure:
Int.3=ON
- restore the power supply:
V1 and V2 are automatically restored to the nominal
factory-set values corresponding to the selected
10
ENGLISH
ON
1 2 3 4
OFF
DIPSWITCH
1
2
SW 1
: MODEL
SW 2
: SETUP
TRIMMER
CA 100/125/150 Q ES
ON
1 2 3 4
OFF
DIPSWITCH
TRIMMER
1
2
SW 1
: MODEL
SW 2
: SETUP
CA 150/160/200/250/315 ES
Model
SW1
Int.1 Int.2 Int.3 Int.4
CA 100 ES
ON OFF OFF OFF
CA 125 ES
ON OFF OFF ON
CA 150 Q ES
ON OFF ON OFF
CA 150 ES
ON OFF ON
ON
CA 160 ES
ON
ON OFF OFF
CA 200 ES
ON
ON OFF ON
CA 250 ES
ON
ON
ON OFF
CA 315 ES
ON
ON
ON
ON
ON
1 2 3 4
OFF
ON
1 2 3 4
OFF
ON
1 2 3 4
OFF
ON
1 2 3 4
OFF
ON
1 2 3 4
OFF
ON
1 2 3 4
OFF
ON
1 2 3 4
OFF
