model, as described above. The restoring of nominal
values is indicated by two quick flashes of an LED
on the card.
The motor is deactivated automatically
- cut off the power supply
- reset the dip-switch SW2 indicated
in the figure:
Int.3=OFF
Operation
Depending on the mode selected during installation:
- two-speed
mode:
the
appliance
operates
continuously; two speeds V1 and V2 can be selected
using an external switch
- adjustable speed mode: the appliance can operate
at a speed which is adjusted between 300 Rpm and
Vmax (via an external potentiometer). The Vortice
ON/OFF control box + potentiometer (code 12826,
on request) can also be used.
Electrical Connections
Fig.
13 ÷ 17.
Maintenance / Cleaning
Fig.
18,19,20.
11
ENGLISH
ON
1 2 3 4
OFF
