25
ENGLISH
Component
Qtà
HRI Mini Heat Recovery Unit
1
Fixing Bracket & Screws
2
6mm x 19mm/21.5mm Condense Adapter
1
Straight Hose Connector
1
Installation, Servicing & Maintenance Instructions
1
Controller
HRI Mini
1
Grille
1
Grille mounting frame
1
GENERAL DESCRIPTION
HRI MINI is a residential heat recovery unit system equipped with speed selector (3 velocities), by-pass and boost speed
functions. This units has beeen designed in order to guarantee a continuous air exchange into the home ambient, by mean
a piping and grid network. Heat is recovered from the “dirty air” expelled from the room, using a high performance heat
exchanger, and transfered to the “fresh” supplied air. The flow rate can be progressively increased up to the "Boost" mode,
for example if there is a high amount of humidity in the room. The extracted air is then discharged to outside via a single
duct and grille.
The recovery unit is also equipped with a warning system for filter maintenance. (for info, see paragraph CLEANING THE
FILTER).
The case is constructed in aluminium/zinc coated steel. Internal faces of the casing are acoustically lined with flame
retardant acoustic foam.
NOTE:
For additional ancillary equipment (e.g. ducting. grilles etc.) contact the Sales Department.
Figure 2a and 2b. HRI MINI EP with a cut out section showing the fans & PCB.
FIGURE 2. EXPLODED FEATURES
Suspended Unit Only
12
Condensate Tray
13
Magnetic Filter Cover
14
Filters
15
Front Cover Assembly
16
Access Cover to Controls
17
Front Cover Screws
CARTON CONTENT
COMPONENT CHECK LIST
12
14
17
13
13
16
15
2a
Summary of Contents for HRI MINI
