Vortice Nordik HVSL Super Blade 110 V Series Instruction Booklet Download

Page: 4 / 80

Keeping this instruction manual

The instruction manual, along with the enclosed Assembly Manual, must be kept and must stay with the machine
through all changes of ownership that may occur during the machine's lifespan.
Anyone who has to come into contact with the ceiling fan in any way or that is involved with using it (due to proximity
of the working area, etc.) must be informed of this manual as well as the enclosed Assembly Manual, and adequately
trained by the purchaser / user.
Conservation of the same must be facilitated by handling it carefully, with clean hands and avoiding putting it on dirty
surfaces.
The parts must not be removed, torn or arbitrarily changed.
The manual and the enclosed assembly manual must be kept in a place protected against damp and heat, and in the
immediately vicinity of the machine to which it relates.
The Manufacturer is able to provide further copies of the Instruction Manual and the enclosed Assembly Manual for
the machine, if requested by the User.
Such requests should be sent to VORTICE Technical Dept. (www.vortice-italy.com)

Recipients

This Manual and the enclosed Assembly Manual are addressed to: The Installer, Operator, and Qualified Personnel
authorised to carry out maintenance tasks in the machine.

EXPOSED PERSON:

This means any person who may find themselves fully
or partly within the area affected by use of the ceiling fan.

OPERATOR:

This means the person(s) tasked with installing, operating, set-ting, cleaning,
repairing, moving or doing maintenance work on the machine.

QUALIFIED PERSONNEL

QUALIFIED OPERATOR

Person(s) that has/have done a specialisation course, training etc. and that
have experience of installing, commissioning, maintaining, repairing or
transporting the machine.

This machine is intended for industrial use, and so professional and not general use, which means that it must be
entrusted to qualified personnel that are adequately trained in using it by the purchaser, and that especially:

Are no longer minors

•

Are physically and psychologically suitable for doing particularly difficult technical tasks.

•

Have been trained on the use of the personal protection equipment indicated and required.

•

Are suitably instructed in using and maintaining the machine.

•

Have been adjudged suitable by the employer to do the tasks assigned to them.

•

Are able to understand and interpret the operator's manual and safety instructions.

•

Know the emergency procedures and how to implement them.

•

Have the capacity to operate this specific type of equipment.

•

Are familiar with the relevant specific standards.

•

Have understood the operating procedures defined by the machine's constructor.

•

1.3

Glossary and pictograms

This paragraph lists uncommon terms or terms whose meaning differs from the common meaning. The abbreviations
used and the meaning of the pictograms used to indicate the operator's qualifications and machine status are
explained below. Use of the same makes it possible to provide quick, unequivocal information required for correct
use of the machine in safety.