Safety precaution
1. Must follow the electric safety regulations when installing the unit.
break.
3. Make sure the power supply matches with the requirement of air conditioner. Unstable
power supply or incorrect wiring or malfunction. Please install proper power supply
cables before using the air conditioner.
4. Properly connect the live wire, neutral wire and grounding wire of power socket.
5. Be sure to cut off the power supply before proceeding any work related to electricity
and safety.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service
8. The temperature of refrigerant circuit will be high, please keep the interconnection
cable away from the copper tube.
9. The appliance shall be installed in accordance with national wiring regulations.
10. Installation must be performed in accordance with the requirement of NEC and CEC
by authorized personnel only.
Grounding requirement
with specialized grounding device by a professional. Please make sure it is always
grounded effectively, otherwise it may cause electric shock.
2. The yellow-green wire in air conditioner is grounding wire, which can't be used for
other purposes.
3. The grounding resistance should comply with national electric safety regulations.
4. The appliance must be positioned so that the plug is accessible.
5. An all-pole disconnection switch having a contact separation of at least 3mm in all
the plug is within reach after installation.
6. Including an circuit break with suitable capacity, please note the following table.
Circuit break should be included magnet buckle and heating buckle function, it can
protect the circuit-short and overload. (Caution: please do not use the fuse only for
protect the circuit)
Installation prepare
Air-conditioner
Circuit break capacity
09K
10A
12K , 18K
16A
31
Summary of Contents for VORT ARTIK
Page 1: ...Libretto istruzioni Instruction booklet VORT ARTIK MONO UE COD 5 471 084 855 15 11 2017...
Page 42: ......
Page 43: ......
