14
2.7 Clear CMOS Setup
If want to clear the CMOS Setup(for example forgot the
password you should clear the setup and then set the password
again.),you should close the JP17 pin 2-3 about 3 seconds,then
open again. Set back to normal operation mode,close pin 1-2.
•
JP17 : Clear CMOS Setup (Reserve Function)
JP17
DESCRIPTION
1-2
Normal Operation
3-4
Clear CMOS Setup
2.8 Battery Backup for CMOS Setup
There have one 4-pin header J9 using for battery backup
function.
When close the pin 1-2 will use the on board battery. When use
external battery you should take off the jumper and use the
connector as external battery connector.
•
J9 : Battery Backup Function
J9
DESCRIPTION
1-2 CLOSE
3-4 OPEN
Using Internal Battery
1-2 OPEN
3-4 OPEN
Use as External Battery
Connector
Summary of Contents for ROCKY 538TXV
Page 2: ......
Page 9: ...7 2 2 Unpacking ...
