background image

English

Français

Deutsch

Español

En-

19

Detailed Functions  

9. EFFECTS controls

REVERB

The REVERB effect adds reverberation to a sound, which 
simulates the feeling of being in a room, with sound reflecting 
off of the ceiling and walls.

6:

REVERB button

This switches the reverb on/off. 
(The button will light when on.)

Selecting the reverb type

Hold down the EXIT button and press the REVERB button.

Press the KEY/LAYER 

 buttons to switch the type.

The reverb type will be shown in the VARIATION display 
of the KEY/LAYER part.

01. HALL1:

 This is a hall-type reverb that simulates the 

reverberations of a large concert hall or ensemble hall.

02. HALL2:

 This is a hall reverb with a more transparent sound 

than HALL1.

03. ROOM1

: This reverb simulates the reverberations of a small 

room.

04. ROOM2:

 This is a reverb with somewhat brighter 

reverberations than ROOM1.

05. SPRING:

 This reverb simulates the spring reverb sound 

used in some guitar amps and organs.

Press the EXIT button to exit from type selection.

7:

REVERB knob

Adjust the amount of reverb.
The way the sound changes will differ, depending on the effect 
type and variation.

Turn the REVERB knob to adjust the first function.
The depth of the reverb will change.

Turn the REVERB knob while pressing the REVERB button 
to adjust the second function.
This adjusts the reverb time and room size. For the 
SPRING reverb, this adjusts the reverb time and spring 
reverberation.

EQ (equalizer)

8:

EQ button

This switches the EQ on/off. (The button will light when on.)

When the EQ is on, you can use the touch sensors to adjust 
the EQ when “EQ” is selected using the CONTROL 
button. (See “CONTROL button, LEDs”, page 15)

All of the equalizer bands are peaking (parametric) equalizers.

Note: 

The EQ on/off settings are not saved in scenes.

TEMPO

9:

TAP TEMPO button

This sets the tempo that is the basis for the LFO speed and so 
on for the effects.

Press the TAP TEMPO button several times, at the tempo 
you wish to set.
Adjusts the delay time and tremolo speed for sounds such 
as E. PIANO (TINE, REED, FM).

Summary of Contents for CONTINENTAL-61




























Reviews: