background image

English

Français

Deutsch

Español

En-

21

System Settings  

4. Local control

Connecting an external MIDI keyboard, and 
configuring the MIDI channels

1

Connect the MIDI OUT connector of the MIDI keyboard to 
be used for the lower part, to the MIDI IN connector of this 
instrument.

2

Set the MIDI transmission channel of the MIDI keyboard 
to be used for the lower part, to any MIDI channel besides 
the one set on the VOX Continental.

Lower part MIDI channel settings for this instrument

1

Hold down the EXIT button and press the SCENE 3 button. 
(The SCENE 3 button blinks.)

2

Using the ORGAN part VARIATION 

,

 buttons, match 

this instrument’s receiving MIDI channel to the LOWER 
MIDI keyboard’s MIDI transmission channel.

Note: 

The LOWER MIDI channel cannot be set to the same 

channel as the MIDI channel, shown in “2. MIDI channel” 
(see page 20).

3

Push the SCENE 3 button to apply the settings.

Push the EXIT button to cancel the settings.

4. Local control

This setting prevents notes from being sounded in duplicate 
when this instrument is connected to a DAW and the 
performance data is echoed back from the sequencer. (Echo 
back occurs when the performance data transmitted when 
playing this instrument is re-transmitted back to this 
instrument from the DAW.) In this case, switch to 

oF

 (local 

control off). (Default setting: on)

1

Hold down the EXIT button and press the DYNAMICS 
button. (The DYNAMICS button blinks.)

2

Switch this setting on or off using the ORGAN part 
VARIATION 

 buttons.

oF

: This instrument and its controllers will be internally 

disconnected from the sound generator. This prevents echo 
back.

on

: Select this setting when you are using this instrument 

by itself.

3

Push the DYNAMICS button to apply the settings.

Push the EXIT button to cancel the settings.

5. Velocity curve

This configures how the volume and tone will be changed in 
response to how hard the keys are played (velocity) on this 
keyboard. (Default setting: 4)

1

Hold down the EXIT button and press the part select 
PIANO button. (The PIANO button blinks.)

2

Set the velocity curve using the ORGAN part VARIATION 

 buttons.

1

2

3

: These curves produce an effect when you play 

strongly.

4

: This is the typical curve.

5

6

: These curves let you produce dynamic change 

without having to play very hard.

7

: This curve provides a flat effect when playing softly.

8

: This curve provides an even more flat effect when 

playing softly.

9

: This curve produces an even softer response when 

playing softly compared to the typical curve #4.

3

Push the PIANO button to apply the settings.

Push the EXIT button to cancel the settings.

6. Organ key trigger

This sets whether the organ sound plays when you play the 
keys lightly or play deep into the keys. Setting the sound to 
play when a key is lightly pressed will let you play the 
keyboard like a vintage tonewheel organ. (Default setting: Lo)

1

Hold down the EXIT button and press the KEY/LAYER 
part select button. (The KEY/LAYER button will blink.)

2

Set the trigger position using the ORGAN part 
VARIATION 

 buttons.

h i

: The organ sound will play when the keys are pressed 

lightly.

Lo

: The organ sound will play when the keys are pressed 

deeply.

3

Push the KEY/LAYER button to apply the settings.

Push the EXIT button to cancel the settings.

7. Auto power off

When a set period of time has passed without playing the 
keys, turning the knobs or pressing the buttons on this 
instrument, the power is automatically turned off. This is 
called “auto power off”. (Default setting: 4h)

1

Hold down the EXIT button and press the SCENE 4 button. 
(The SCENE 4 button blinks.)

2

Enable auto power off with the ORGAN part VARIATION 

 buttons.

d

 (Disable): The auto power off function will be disabled. 

The power will not automatically turn off.

4h

 (4 hours): When the VOX Continental is left on for 4 

hours without being operated or played, it will 
automatically turn off.

3

Push the SCENE 4 button to apply the settings.

Push the EXIT button to cancel the settings.

8. VOX logo LED on/off

This turns the VOX logo LED on the rear panel on or off. 
(Default setting: On)

1

Hold down the EXIT button and press the part select 
ORGAN button. (The ORGAN button blinks.)

2

Use the ORGAN part VARIATION 

 buttons to set 

whether the VOX logo LED lights up or not.

of

: off

on

: on

3

Push the ORGAN button to apply the settings.

Push the EXIT button to cancel the settings.

Soft

127

Strong

1

1

2

3

8

6

5

4

7

9

Summary of Contents for CONTINENTAL-61




























Reviews: