Installation
Installation and Programming Manual
F-1
APPENDIX F
INSTALLATION PROCEEDURES FOR
VOXBOX
1. Connect VoxBox to voicemail ports.
2. Load the relevant PBX VUP file and check PBX Parameters (see Sections 3.3
and Section 6 of User Guide) to ensure correct integration between the
VoxBox and the PBX.
3. Set the VoxBox’s real time clock. (see Section 3.4)
4. Set the system schedule. (see Section 3.5)
5. Create mailboxes. (see Section 3.6.1)
6. Define a notification type for each mailbox. (see Section 3.6.3)
7. Define notification parameters. (i.e. message light on and message light off and
interval between ring notification in Section 3.6.3)
8. Record (see Section 3.7.1) and program (see Section 3.7.2) script menus for the
Automated Attendant. Make sure you define the mailboxes before building
Automated Attendant script menus.
9. Send parameters to the VoxBox.
10. Dial voicemail number and test system is answering.
11. Test internal and external diverts to mailboxes.
12. Test message notification.
13. Test system clears down correctly during mailbox greetings.
14. Test all types of transfers.
15. Test message retrieval.
