DTMF Programming
3.2 First Time Programming Checklist
1. Call from a touch-tone telephone to the VoxBox. You will hear the default
message (system message 000 - see Appendix C).
2. Dial *900 and the administrator password (default: 1234) to enter the
programming mode.
3. Set the PBX parameters (see Sections 3.3 and Section 6) to ensure the proper
operation of the VoxBox with your PBX.
3-2
Installation and Programming Manual
4. Set the VoxBox’s real-time clock (see Section 3.4).
5. Set the system schedule (see Section 3.5).
6. Create mailboxes (see Section 3.6.1).
7. Define a notification type for each mailbox (see Section 3.6.3).
8. Define notification parameters (i.e., message light on and message light off and
interval between ring notification in Section 3.6.3.)
9. Record (see Section 3.7.1) and program (see Section 3.7.2) script menus for the
Automated Attendant. Make sure you define the mailboxes before building
Automated Attendant script menus.
