DTMF Programming
3-14
Installation and Programming Manual
•
None
. The notification feature is disabled.
•
Message Light On 1
. The VoxBox signals the PBX that a mailbox has
received a message. The PBX then turns on the message light of the telephone
extension. If the Message Light Off code is programmed, the code is
transferred to the PBX after the mailbox owner retrieves all his new messages.
Some PBXs do not support the Message Light Off code. Instead they turn the
message light off when the mailbox owner presses the message button on his
proprietary telephone set and the VoxBox starts playing the messages (see
Table 3-3).
•
Message Light On 2
. Same as Message Light On 1 but used only for PBXs
that have two different codes for different telephones or for special tone
notification (see Table 3-3).
The system administrator can set the notification method to one of the two states
(code *760):
−
Notification on 1
st
new message
−
Notification on every new message
•
Sign Rings
. The VoxBox rings the notified extension number. These Sign
Rings may be sent at programmed intervals (code *720). The VoxBox stops
sending Sign Rings after the mailbox owner retrieves all his new messages or
the maximum number of retries has been made (code *750).
•
Rings
. The VoxBox rings the notified extension for a programmed time period
(code *730). When the mailbox owner answers, the VoxBox prompts him to
enter his password. After entering the password, the mailbox owner may
retrieve his messages. If the mailbox owner does not answer, the VoxBox tries
again at programmed intervals (code *720). The VoxBox stops sending Ring
notifications after the mailbox owner retrieves all his new messages or the
maximum number of retries has been made (code *750).
Remote Notification
The mailbox owner may choose to be notified at a remote location (i.e., his mobile
telephone, home telephone or pager) by entering a remote telephone number (of up
to 20 digits) or pager number (of up to 40 digits). You can use any combination of
*, #, A-D, 0-9, and Pause when setting the remote notification telephone number.
After remote notification is enabled, the VoxBox will dial the remote phone or
pager number and notify the mailbox owner of any new messages. After entering
