Installation and Programming Manual
4-1
4. PROGRAMMING BY COMPUTER
This section describes the purpose and main features of the Voice mail Utility
Program (VUP) and details the installation process.
Note: The VoxBox Lite uses the VUJ, a software utility identical to the VUP,
however specifically adjusted to the VoxBox Lite’s configuration.
The VUP enables you to:
•
Define PBX parameters
•
Set the VoxBox clock and calendar
•
Create and maintain mailboxes
•
Build Automated Attendant menus
•
Review traffic statistics
•
Print system parameters and statistics
Programming the VoxBox via the PC is done offline until sent in one block to the
VoxBox. We recommend that you save the new configuration in a file.
Using the VUP, you can also:
•
Open a configuration file to make changes and then to upload them to the
VoxBox
•
Open the default configuration file
•
View VoxBox statistics, e.g., line and memory utilization
4.1 Connecting The VoxBox To The Computer
To connect your computer to the VoxBox:
1. Remove the side panel cover of the VoxBox.
2. Remove any cable attached to the VoxBox’s RS-232 connector.
