P70
Digital Media
Player Controller
&
61
中
文
ENGLI
SH
PART NAMES AND FUNCTIONS
36. X Parameter (Time) button
This button is used to adjust the parameter time value. You can push the X parameter (Time) button, LED on,
and turn the JOG WHEEL to adjust the parameter time value. If the hold function is selected any changes to the
effect parameters will be momentary. During hold function is selected the auto beat sync will be turned off.
37. ECHO Effect
This button is used to activate and deactivate the echo effect. The echo effect adds an echo to your output
signal.
38. FLANGER Effect
This button is used to activate and deactivate the flanger effect. The flanger effect distorts the output signal
and creates an effect similar to the frequency phasing in and out of each other. This frequently applied effect is
similar to the Phase effect, but slightly more harmonious, emphasizes the upper pitch more and is reminiscent of
a flying aircraft. Your device synchronizes the effects automatically with the current BPM value. Use the FX Beat
Sync Plus button
32
and Minus button
30
to precisely set the frequency.
To manually change the beat frequen¬cy of the effect, press the X Parameter (Time) Button
36
and regulate the
frequency value with the Jog Wheel (from 0 - 9990 mSec.). To influence the intensity of the effect, press the Y
Parameter (Depth) Button
40
and set the volume with the Jog Wheel (from 0 – 255).
TIP : The Flanger effect is best when set to 4/1 beat with the Beat Link Button.
39. Filter Effect
This button is used to activate and deactivate the filter effect. The filter effect tweaks the original sound to add
different tonal definition.
The player synchronizes the effects automatically for the current BPM value. Use the FX Beat Sync Plus button
32
and Minus button
30
to precisely adjust the frequency to match the beat.
To manually change the beat frequency of the effect, press the X Parameter (Time) Button
36
and regulate the
frequency mean of the Jog Wheel (von 0 - 9990 mSec.). To influence the intensity of the effect, press the Y
Parameter Button
40
and adjust the volume with the Jog Wheel (from 0 – 255).
TIP : To create a great filter sweep effect, set the Time Parameter value to „0“ mSec. and activate
„Hold“
35
. Use the Parameter Ratio Button and the Jog Wheel to infinitely filter the frequency of
your track from the value „0“ (High Pass Filter) to the value of „255“ (Low Pass Filter).