72
ENGLISH
OPERATIONS
•
Pitch Bending
- Use Pitch Bend Button
10
As you are fi nding the right tempo, the track position will drift until it is fi ne-tuned and the tempo is matched.
Pitch Bending provides a quick fi x to keep the position as close as possible to deck one. Pressing the PITCH
BEND – or PITCH BEND + buttons will decrease or increase the speed of playback temporarily. The extent to
which the speed is changed is proportionate to the amount of time the button is pressed. For example, if the
PITCH BEND + button is held in continuously, the speed continues to increase until the maximum limit set by the
PITCH RANGE is reached. Once the PITCH BEND + button is released the pitch will return to the pitch set by the
PITCH SLIDER.
- Use Jog Wheel
24
The jog wheel can also be used to temporarily bend the pitch of the music during normal playback. During
playback rotate the wheel clockwise to speed up and counterclockwise to slow down. The speed that you rotate
the jog wheel determines the percent of pitch bend. It is recommended that you use the outer edge of the jog
wheel for this type of control, as touching the top surface may cause interruption of playback in certain modes of
operation.
- Key Lock
This function allows the tempo or BPM of the music to be altered without affecting the musical key. While this
button is illuminated, the key will be locked at zero.
How to Set a Seamless Loop
•
Creating a Seamless Loop
Step 1 :
Press the PLAY/PAUSE button
16
to begin playback. The button illuminates solid green (not fl ashing).
Step 2 :
Set the start point of the seamless loop by pressing the IN button
43
at the desired point in time.
Step 3 :
Set the out point of the loop by pressing the OUT button
44
at the desired point in time. Playback will
immediately return to the previously set IN point and play to the OUT point, creating a seamless loop without
interruption. When the loop has been set, the RELOOP/EXIT button
45
lights and the LOOP indicator on the LCD
screen will now be fl ashing. In the same time, the LOOP IN and LOOP OUT button are fl ashing.
•
To Exit the Loop
During loop playback, press the RELOOP/EXIT button
45
to exit the loop. When the music reaches the OUT
point, it will play through it instead of looping back to the IN point.
•
To replay a seamless loop (Reloop)
To replay the loop, press the RELOOP/EXIT button
45
. The loop can be re-triggered by pressing the button (until
a new loop is created). Press the RELOOP/EXIT button to exit the loop again.
•
Modifying Loops
- To Adjust LOOP Out point
Once a seamless loop is created, the OUT point can be changed without stopping the loop play.
MCU-300KMA (082412).indd 章節2:72
MCU-300KMA (082412).indd 章節2:72
2012/8/24 下午 05:42:01
2012/8/24 下午 05:42:01
