74
ENGLISH
OPERATIONS
Step 2 :
To active the Auto Beat Loop Mode
Press the Auto Beat Loop button
41
to active the Mode.
Step 3 :
Setting the LOOP IN point
Press the LOOP IN button
43
to set the start point of the loop. The end of the Auto Beat Loop is
determined by the loop length and current BPM. And the Auto Beat Loop begins.
Step 4 :
Changing the Auto Beat Loop Length
During the Auto Beat Loop playing, you can change the loop length by press Plus button
32
and Minus
button
30
. The display indicates loop length as “LOOP Length” .
Step 5 :
Stop a loop
Press the RELOOP/EXIT button
45
to exit the loop.
Setting Hot Cues / Loops
To save a Hot-cue points/Loops point to an empty bank pad, simply press one of the empty bank pad. It will fl ash
orange, and then turn solid orange, letting you know that a Hot-cue point/Loop has been stored.
•
Buttons containing hot cue points will light orange.
•
Buttons containing loop data will light Blue
Setting Hot Loops, Loops must be created using the main loop interface (LOOP IN/OUT button
43
44
. Once a loop
is created, following the setting process.
Step 1 :
During playback (loop play) or pause, press the REC button
14
. Now the record mode is active and the
REC button
14
is light.
Step 2 :
Press the desired pad from the Bank Pads (1, 2, 3, 4)
13
at the point you wish to set as a hot-cue points
or loops in that pad. You can overwrite any existed Hot-cue.
Step 3 :
Press the REC button
14
again to exit the Hot Cues setting mode.
Press the stored Hot-cue pads again, and playback will seamlessly restart from the stored Hot-cue point and the
pad will fl ash. You can repeatedly press the pads to create a stuttering effect. If the player is in pause or cue mode,
pressing the button will start playback from the stored cue point, but will only keep playing while the button is
depressed, just like the main CUE button
17
.
Clearing the stored Hot-Cues/Loops
Press the CLEAR button
15
to active clear memory function. While the button is on, press the pad(s) you wish to
clear and those pads will also fl ash. The cleared pads’ light is off, letting you know that there is no information stored
in them. Press the CLEAR button
15
again to exit the clear memory mode.
How to Record Hot Cues/Loops
Every track can be record 4 cue points or loops. The player will record and recall cue points and loops saved to the
four pads for up to 2000 memos.
For the external USB device, the numbers depended on the available memory space of the USB device. In general,
the saved data size is very small so you don’t worry about the quantity.
To save current cue points, loops, and setting, press and hold the REC button
14
until the display reads SAVING.
MCU-300KMA (082412).indd 章節2:74
MCU-300KMA (082412).indd 章節2:74
2012/8/24 下午 05:42:13
2012/8/24 下午 05:42:13
