128-6832
8 of 16
3 Wire Ground Switched Door Lock Circuits:
In this application, the Green wire of the 2 pin harness provides a ground pulse during the arming sequence, or
pulsed ground lock output. Connect the Green wire to the low current ground signal wire from the factory door lock
switch to the factory door lock relay.
The Blue wire of the 2 pin harness provides a ground pulse during the disarming sequence, or pulsed ground unlock
output. Connect the Green wire to the low current ground signal wire from the factory door unlock switch to the factory
door unlock relay. See Below For Wiring Detail.
3 Wire Ground Switched Door Lock/Unlock Wiring Detail
8
3 Wire Positive Switched Door Locks:
In this application, the Green wire of the two pin harness provides a + 12 volt pulse during the disarming sequence,
or pulsed 12 volt unlock output. Connect the Red wire to the low current 12 volt signal wire from the factory door unlock
switch to the factory door unlock relay.
The Blue wire of the two pin harness provides a + 12 volt pulse during the arming sequence or pulsed 12 volt lock
output. Connect the Green wire to the low current 12 volt signal wire from the factory door lock switch to the factory
door lock relay. See Below For Wiring Detail.
3 Wire Positive Switched Door Lock/Unlock Wiring Detail
.
Green Lock Wire
Blue Unlock Wire
Green Unlock Wire
Blue Lock Wire
Summary of Contents for CA-510
Page 14: ...128 6832 14 of 16 13...
Page 15: ...128 6832 15 of 16...
