Voxx Electronics CA-510, Installation Instructions Manual

128-6832

9 of 16

PROGRAMMABLE FEATURES:

Feature

LtsFlash1X

Lts Flash 2X

Lts Flash 3X

Lts Flash 4X

Default

1. Run Time

5 Min.

10 Min.

15 Min.

20 Min.

10 Min.

2. Ign. 2

Off During Start

On During Start

On

3. Parking Lights ON

Flash

Steady

4. Tach Mode

Tachless

Tach

Tach

8

5. Voltage Level > .5V B4 Start

< .5V B4 Start

> 0.5

6. Diagnostics

Off

On

Off

7. Door Locks

1 Sec/1 Sec

3.5 Sec/3.5 Sec 1 Sec/Dbl 1 Sec

1 Sec/1 Sec

8. Crank Time

0.8Sec

1.0 Sec

1.5 Sec

2.0 Sec

1.0

9. Gas/Diesel

 Gas

  Diesel 10

Diesel 15

Diesel 20

 Gas

To Program Features:

1.  Turn the ignition key to the ON position.

2.  Press and release the program switch 3 times.

3.  Immediately turn the ignition key OFF, then back to ON.

4.  Press and release the program switch 2 times, wait 1 second then go to step 5.

5.  Use the UNLOCK  Button to advance to the feature that you want to change.  EXAMPLE - If you need to
change programmable feature number 3, press and release the UNLOCK Button 3 times in succession.  The
parking lights will flash 3 times confirming that selected  feature 3 can now be programmed.

7.  Press the LOCK Button  to change the selection of the programmable feature.  If you are not sure what the
setting for any feature is, press the brake one time, the parking lights will flash once or twice, etc... indicating  the
features setting.

NOTE: Once you enter the feature-programming mode, do not allow more that 15 seconds to pass between
steps, or the programming will be terminated.