3
2019 Voxx Electronics Corporation. All rights reserved.
Arming the Security System (Optional)
To arm the system, exit the vehicle, close all doors, then press the
button. The
parking lights will flash one (1) time, indicating the system is armed, has locked the
doors (if equipped and connected) and activated the starter disable feature. The LED
status indicator will blink steadily, once per second.
NOTE: The system is equipped with a feature called Silent Choice. If enabled,
the system requires a second press of the button to activate an audible arming
response from the vehicle.
*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more
than 3 seconds.
Using Your Remote Control
Disarming the Security System (Optional)
To disarm the system press the
button two (2) times. The parking lights will flash
one (1) time, indicating the system is disarmed and has unlocked the doors (if
equipped and connected).
NOTE: The system is equipped with a feature called Silent Choice. If enabled,
the system requires a second double press of the
button to activate an audible
disarming response from the vehicle. If your system is set up for two (2) step unlock, a
third press of unlock will activate the audible response.
Door Lock
To lock the vehicle doors press and release the button.
Door Unlock
To unlock the vehicle doors press and release the
button two (2) times.
User Selectable Notification Chirps
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button three (3) times. The
system will respond with one (1) chirp for ON or two (2) chirps for OFF.
