background image

 

 
 

 

 

Press the button

 2

 to 

set the ”minute” digit to 

30

”.

 

   
 

 

 

Press the button 

3

 to 

set the alert alarm timer 

and the 

 icon will 

flash on the main page.

 
 

 

Push the 

 button 

While the  icon is 
flashing or When alert 
alarm timer trigger, the   
screen will display alert 
alarm timer

 

 
 

 

or

 

Press the button 

2

 to 

set off the alert alarm 
timer or press any 
button to stop alarm 
while alert alarm timer 
trigger

 

 

C- P3- 3. “COUNT DOWN TIMER” SETTING:   

Example set the count down timer to 

2:30 

Note:

 When count down timer is trigger, press any button to stop the beeper. 

 

Spin down the 

 

switch 

to the page 3

 

   
 

 

 

Press the button 

3

 and 

the ”hour” digit flashes 
for adjusting.

 

 
 

 

Press the button 

2

 to set 

the ”hour” digit to “

02

” 

 
 

 

 

Press the button 

1

 and 

the ”minute” digit flashes 
for adjusting.

 

                                           

 
 

 

 

Press the button 

2

 to 

set the ”minute” digit to 

30

”.

 

   
 

 

 

Press the button 

3

 to 

start the count down 

timer and the 

 icon 

will flash on the main 
page.

 

 
 

 

 

While the

 icon is 

flashing push the ” ” 
button to display the 
count down timer

 

 
 

 

or

 

Press the button 

2

 to 

set off the count down 
time.

 

                                           

C- P3- 4.

 

“DAILY START

 

TIMER” SETTING:   

Example set the Daily Start Timer to 

05:00A

 

 

 

Spin down the 

 

switch 

to the page 3

 

   
 

 

 

Press the button 

4

and   

the ”hours” digit flashes 
for adjusting.

 

 
 

 

Press the button 

2

 to set 

the ”hours” digit to “

05

”.

 
 

 

 

Press the button 

1

 and 

the ”minute” digit flashes 
for adjusting.

 

                                             

 
 

 

 

Press the button 

2

 to 

set the ”minute” digit to 

00

 

   
 

 

 

Press the button 

3

 and the 

setting is done. The 

 

icon will flash on the main 
page.

 

 

 

 
 

 
 

 

10

Summary of Contents for SRT-9000






















Reviews: