background image

 

17

1. Press 

 button on the Portable Handset. 

2. Press 

the 

 

buttons until you reach the 

 screen. 

3. Press 

the 

 button. 

4. Press 

the 

 

buttons until you reach the 

 screen. 

5. Press 

the 

 button. 

6. Press 

the 

 

buttons until you reach the 

 screen. 

7. Press 

the 

 button. 

8. Press 

the 

buttons until you reach the 

 screen.  “OK” means the 

 button. 

9. Press 

the 

 button. 

10. Press the 

 button twice to exit the programming functions.  

 

 

 

 

   

Redialing A Number Using The Cellular Dial Mode

  

You can redial the last number entered into your phone by: 

1. Press 

the 

 button.  The phone number will appear. 

2. Press 

the 

 button. 

3. Press 

the 

 button to end the call after your conversation.  

   

Redialing A Number Using The Normal Dial Mode

  

You can redial the last number entered into your phone by: 

1. Press 

the 

 button.  The phone number will appear. 

2. Press 

the 

 button. 

3. Press 

the 

 button to end the call after your conversation.  

Note:

  Pressing the 

 button repeatedly will show the last 5 phone numbers dialed.   

 

 

BASIC OPERATION - Redialing A Number

 

Summary of Contents for CL-2200XP ALPHA














































Reviews: