© 2020 Van Putten Instruments BV | MAN-VP-LOGR-UK | Revision: 2001 | Date: 01-10-2020
8
Sensitivity is 5 times higher if the power cable is wrapped around the coil 5 times
Note
: The alignment of the sensor has no influence on the accuracy, due to the compensation circuit
added in the VPLog-i-R.
WARNING: HIGH VOLTAGES ARE HAZARDOUS AND CAUSE AN IMMEDIATE
RISK TO SERIOUS INJURY OR EVEN DEATH.
WARNING: BE VERY CAREFUL TO RESPECT ALL GENERAL
AND LOCAL SAFETY PRECAUTIONS
(E.G DISCONNECT POWER, WEAR SAFETY GLASSES, RUBBER GLOVES
AND ADEQUATE CLOTHES, ETC)
Power-On/Off
The VPLog-i-R sensor has no power on/off switch. Applying power to the sensor starts its internal
power-up sequence. Switch the sensor off by removing its power supply.
5
Connection
Terminals
Terminal
Color
PWR
Red
RS485A
Orange
RS485B
Brown
GND
Black