i2 MICRO iCON USER MANUAL
VPC
07/23/21
For more information visit vpc.com
4
RECEIVER MOUNTING
PART # 310 130 XXX
TOOLS REQUIRED
Phillips Head Screwdriver
MOUNTING INSTRUCTIONS
1. Prepare the mounting surface using the dimensions
provided in (
Figure A
)
.
2. Attach the i2 Micro iCon receiver to the panel with the
provided 2-56 Phillips head screws and nuts (
Figure B
).
Torque screws to 2 in-lbs [0.23 Nm].
NOTE:
If the mounting surface is thicker than 0.125″
[3.18 mm], longer screws may be needed.
NOTE:
If the mounting surface has threaded holes, the nuts
will not be needed.
NOTE:
M2 hardware can be used in place of the provided
2-56 hardware.
NOTE:
The dimensions shown reflect use of a laser cutting
or punch press process. If using conventional machining
processes the 3.49″ [88.65] dimension will be 3.69″ [93.73]
and a .09″ [2.29] radius needs to be added to the corners.
Figure A. Recommended panel cutout.
Figure B. If metric hardware is preferred, the supplied 2-56 hardware can be
replaced with M2 hardware.
.74
18.8
3.49
88.6
.23
5.7
3.940
100.07
.100 THRU, TYP. 4 PLCS
FOR MOUNTING PLATES THICKER THAN .09"
.086-56UNC-2B THRU, TYP. 4 PLCS.
FOR MOUNTING PLATES .09" THICK OR LESS
.36 TYP.
9.1
.19 TYP.
4.8
.050 TYP.
1.27
R.09 TYP.
2.3
4
.640 TYP.
16.26
TOLERANCES ARE:
.XX = [.25].01
.XXX = [.13] .005
UNLESS OTHERWISE SPECIFIED
5 TYP.
*SPACING IS APPLICATION SPECIFIC, .80" MINIMUM, 1.00" RECOMMENDED
TABLE 1
4 SEE TABLE 1 FOR MINIMUM DISTANCE OF SUBSEQUENT SIDE BY SIDE CUTOUTS.
5
PART NUMBER
DESCRIPTION
RECEIVER CUTOUT
SPACING
410130101
ITA, i2 Micro iCon, 168 Position
1.00 [25.40]
410130104
ITA, i2 Micro iCon, 120/12 Position Hybrid
1.00 [25.40]
410130106
ITA, i2 Micro iCon, 168 Position with
Oversized Backshell
2.19[55.63]
410130115
ITA, i2 Micro iCon, 120/12 Position Hybrid
with Oversized Backshell
2.19[55.63]
5
