2
SECTION 3.
General Specifications
Performance
Full Scale Input
3.0 to +3.0 mV/V full bridge
Dead Load Range
± 100% of full scale input
Calibration Range
0.2 to 2.5 mV/V for nominal output
Linearity
0.01% of full scale output
Common Mode Rejection
120 dB minimum
Common Mode Input
±20% of excitation voltage
Temperature Stability
50 ppm/°C
Response Time
<100 ms
Input Impedance
>250 Mohms nominal
Environment
Operating Temperature
0 to 55°C (32 to 131°F)
Storage Temperature
-25 to 55°C (-13 to 131°F)
Humidity
85% at 55 degrees C
Atmosphere
nonflammable and noncorrosive
Transducer Supply
Excitation
10 volts DC (symmetric ±5V)
Gage Resistance
175 -1000 Ohms
Gage Type
foil (2-3mV/V), full bridge
Number of load cells
two (2) per tension zone
Power Supply
Input
24 VDC, +/-5% @ 125 mA
Range
20 to 30 VDC
Analog Output Signals
Voltage
0-10 VDC @ >2K Ohms
Current
4-20mA @ < 700 Ohms
Galvanically Isolated
Yes
Interface
Panel indicator or PLC input
Enclosure
Type
DIN-Rail mount
Overall Size
45 x 75 x 105 mm L x H x D (1.77 x 2.95 x 4.13 in)
Weight
185 grams (6.5 oz)
Terminals
Approvals
CE
conforms to IEC 61326
Operating Conditions
Pollution
pollution degree 2
Protection
IP20 enclosure
Ordering information
The basic Unit part number is PS1010T.
Note: Data and specifications are subject to change without notice.
