BEFORE FLYING CHECK EVERYTHING
Before each flight, inspect the airplane for any loose parts. Check the hinges, make sure the pushrods are still firmly attached,
and check the engine mounting bolts. In general, check everything on the plane that might possibly come loose.
DO NOT FLY NEAR A POWER LINE
The power lines cause radio interference, so avoid flying near them.
3/8” (~10mm)
RUDDER STROKE
ELEVATOR STROKE
AILERON STROKE
26- Control Surface
1-3/16”(35mm)
1/4”(~6mm)
1/4”(~6mm)
3/8” (~10mm)
1-3/16”(35mm)
Adjust the engine always from behind, but never from infront or the sides as rotating propeller may badly injure you!
Do not allow watching people to get too close to a rotating propeller.
Ensure the spinner and propeller are securely attached. Immediately disure defective propeller as well as deformed spinners.
Warning!
IMPORTANT:
Please do not clean your model with pure alcohol, only use liquid soap with water or use glass cleaner
to clean on surface of your model to keep the colour not fade.
