10
|
6-Drawer Dresser
6-Drawer Dresser
| 11
Installation
Installation
STEP 5
STEP 4
1. First prepare the Top Panel (I).
2. Insert the blue end of Cam Lock (6A) into the holes at the bottom of Panel I. (You will use 6 pcs)
VERY IMPORTANT:
Use your hands to insert the Cam Locks. Do not use a hammer.
3. Put Panel I on Panels A, B and C while inserting the other end of Cam lock (6A) into the
predrilled holes on Panels A, B and C. Push and gently tap Panel I.
Tighten Cam Nut (6B) clockwise
to lock the Cam Lock Nut up by going under Panel I, then tighten it upon both sides (Panels A and B) and
upon the middle piece (Panel C).
Insert Wood Dowel (11) into both left and right sides of Panels G and H, then align the Wood Dowels with the
pridrilled holes on Panels A and B, slightly tapping them in with a hammer.
Fix Screw (2) using predrilled holes on Panel B into Panels D, E and F by using the Allen Key (1).
Insert 2pcs Screw (2) using predrilled holes on Panel E into Panel G with the Allen Key (1), then insert another 2pcs
Screw (2) using predrilled holes on Panel F into Panel H, again with the Allen Key (1).
Insert Bottom Pin (7) onto the bottom edge of Panels A, B, G and H, slightly tapping them in with a hammer.
G
H
A
B
11
7
2
1
A
I
C
B
6A
6B
1
