5. Gently pull the yoke to the end and push to the end right several times.
6. Click next and finish the calibration wizard.
7. Calibration is done. Go to “Test” and see if all controls are properly assigned for Flight Master Yoke.
8. Rotate the yoke form the left to the right and move the yoke from backward to the forward.
Then “+” mark will follow the direction of the yoke movement
www.vrinsight.com
Tel : +82-31-284-7090~91 Fax : +82-31-284-7092
E-mail :
tech@vrinsight.com
Web site :
www.vrinsight.com
9. Wheel up and down the Pitch / Trim wheel. When you rotate wheel up for nose down, button no. 30 will
activate and Red LED will light up. When you rotate wheel down for nose up, button no. 29 will activate and
Green LED will light up.
.
3
Pitch/Trim wheel down for nose
up / Button no. 29
Pitch/Trim wheel up for nose
down / Button no. 30
