VS Security Products LTD
ZZ201216, ZZ201217
Page 6 of 31
SECTION 2:
BOX CONTENTS
Carefully remove your VS Security Products Datagone LG
-
PLUS from its shipping carton and verify that all parts are present.
If there are missing or damaged parts contact
VS Security Products Ltd
, or an authorized distributor
immediately.
You should find the following:
Datagone LG
-
PLUS degausser
Mains Power Lead
Small Media Adaptor
Manual & Warranty Card
CD including Software and FTDI Drivers.
USB Cable
Optional
-
Barcode Scanner (if ordered)
Optional
-
Label Printer (if ordered)
Optional
-
Label Rolls (If ordered)
SECTION 3: HARDWARE INSTALLATION
Care should be taken when moving/handling the Degausser.
3.1 Unpacking
The Datagone LG
-
PLUS is shipped inside a cardboard packing case.
Unpack the degausser carefully by disassembling the packing case and inspect it for signs of physical damage. If damage is
apparent, a claim should be filed with the carrier immediately.
Once you have exposed the degausser, you can carefully remove it from the packing box.
3.2 Power Wiring
Power connection is made to the degausser in the form of an IEC type electrical lead (supplied). The user should ensure that
their power supply meets those outlined on page five.
SECTION 4: INTRODUCTION TO THE DATAGONE LG
-
PLUS DEGAUSSER
The
Datagone LG
-
PLUS
is a high energy, hard drive Degausser. They erase Longitudinal Magnetic Recorded (LMR) and
Perpendicular Magnetic Recorded (PMR) Hard Disk media with a coercivity of up to 5000 Oersted
’
s and magnetic backup
tape media with a coercivity of up to 2800 Oersted
’
s, including DLT, LTO, 4mm and 8mm, DDS and more.
SECTION 5: SOFTWARE INSTALLATION
The following details the installation procedure for the VSSP Data Logging Software.
5.1 Installing the Data Logging Software
Insert the software installation disc into the CD/DVD drive on your PC, and wait for the VSSP software installation screen to
appear. If the screen does not appear, open
‘
My Computer
’
and double click on your CD/DVD drive icon to launch the disc
menu. Click on the SLCDMENU executable file.
Follow the on screen instructions to install the drivers. When the FTDI drivers have been installed
(If they were not already
present)
click the
Install VSSP Logger
button.
Summary of Contents for Datagone LG-PLUS ZZ201216
Page 1: ...ZZ201216 ZZ201217 Rev 14 ...