VSG LP60032, Manual

2

•  The Owner/Employer shall ensure that lift operators are qualified and that they are 

trained in the safe use and operation of the lift using the manufacturer’s operating 

instructions;  ALI/SM 10-1, ALI Lifting it Right safety manual;  ALI-ST-10 ALI Safety 

Tips card;  ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-

Safety Requirements for Operation, Inspection and Maintenance;  ALI/WL Series, ALI 

Uniform Warning Label Decals/Placards; and in the case of frame engaging lifts, ALI/

LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging Lifts.

•  The Owner/Employer shall establish procedures to periodically inspect the lift in 

accordance with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008, 

American National Standard for Automotive Lifts-Safety Requirements for Operation, 

Inspection and Maintenance; and The Employer Shall ensure that lift inspectors are 

qualified and that they are adequately trained in the inspection of the lift.

•  The Owner/Employer shall establish procedures to periodically maintain the lift 

in accordance with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008, 

American National Standard for Automotive Lifts-Safety Requirements for Operation, 

Inspection and Maintenance; and The Employer Shall ensure that lift maintenance 

personnel are qualified and that they are adequately trained in the maintenance of 

the lift.

•  The Owner/Employer shall maintain the periodic inspection and maintenance re-

cords recommended by the manufacturer or ANSI/ALI ALOIM-2008, American Na-

tional Standard for Automotive Lifts-Safety Requirements for Operation, Inspection 

and Maintenance.

•  The Owner/Employer shall display the lift manufacturer’s operating instructions;  ALI/

SM 10-1, ALI Lifting it Right safety manual;  ALI-ST-10 ALI Safety Tips card;  ANSI/ALI 

ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements 

for Operation, Inspection and Maintenance;  and in the case of frame engaging lifts, 

ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging Lifts; 

in a conspicuous location in the lift area convenient to the operator.

•  The Owner/Employer shall provide necessary lockout/tagout means for energy 

sources per ANSI Z244.1-1982 (R1993), Safety Requirements for the Lockout/Tagout 

of Energy Sources, before beginning any lift repairs.

•  The Owner/Employer shall not modify the lift in any manner without the prior written 

consent of the manufacturer.

The Owner/Employer: