VSG LP60032, Manual

3

• Never allow unauthorized or untrained persons to operate lift or rolling jacks.

• Shop Policy should prohibit customers or non-authorized persons from being in shop area while lift is in use.

• Thoroughly train all employees in the use and care of lift and rolling jacks.

• Be Sure no one is standing in front or behind lift while vehicle is being driven onto or backed off the lift.

• DO NOT allow rear tires or portion of vehicle to interfere with ramp/chocks.

• Be Sure front wheel stops are in raised position before driving vehicle onto lift.

• Never allow front wheels to strike the front wheel stops.

• DO NOT permit employees or customers on lift when it is either being raised or lowered.

• Always stand clear of lift when raising or lowering and observe “Pinch Points” Warning.

• Never overload lift: capacity of lift is 14,000 lbs. (6,350 kg.) (7,000 lbs. (3,175 kg.) per axle).  CAPACITY SHOULD 

NOT BE EXCEEDED.

• Always engage parking brake and use the rear wheel chocks to keep the vehicle from rolling freely on the  

runways.

• Always lower lift on locks before working on vehicle.

• Keep area around lift clean of tools, debris, grease, and oil.

• Always keep runway clean.

• Replace all caution, warning, or safety related decals on the lift when unable to read or missing.

• For Rolling Jack Safety Instructions see Rolling Jack Installation, Operation and Maintenance Instructions in 

the rolling jack box. 

• Never use work step while lift is in a raised position.

SAFETY INSTRUCTIONS