FLOW-meter Version: 1.0
Page 15/29
2.3
Graupner HoTT
Using the HoTT System there are 2 ways to transmit telemetry data, on the one hand as "text"
and on the other hand only the pure values.
Using text mode it is possible to establish a bi-directional data transfer, meaning you can use
the keys of the radio or the Smartbox in order to change/enter values in the sensor. Using speech
output is not possible in this mode.
In data-mode the values are only transmitted in a fixed format in one direction. The format is
defined by the sensor type. In this mode it is possible to have speech output for the sensor
values.
2.3.1
Sensortype
The FLOW-meter for HoTT is a GAM (
G
eneral
A
ir
M
odul), a ESC (
E
lectronic
S
peed
C
ontroller) – or a VAR (
Var
io). Please select this sensor-type on your radio or Smartbox.
2.3.2
Textdisplay
Using the text-display you can see the current FLOW-meter data and you can also change
parameters of the FLOW-meter.
Change to input
Alarms / parameters
of the FLOW-meter
(s. section 2.3.4)
ENTER
SET
+
DEC
INC
ESC
DEC
INC
ENTER
MX-12
MX-16
MC-16
MC-20
MC-32
SET
