TOOLS REQUIRED:
10mm Box Wrench
5mm Hex Key
Phillips Screw Driver
PARTS LIST
Index Description
Qty.
1
Windshield, Quantum Hardcoated polycarbonate 1
REMOVAL AND RE-INSTALLATION
Retain all fasteners and parts as they will be
reused.
Installation of windshield will be in reverse of
of removal.
Position stock windshield in highest potion.
1.
Move mirror forward. Lift rubber sleeve to expose inside
attachment point. Repeat on opposite side.
2.
Gently pry “bracket” over hex bolt to in order to remove
hardware holding front body panel in place. Repeat on
opposite side.
Figure 1. (10mm Box Wrench)
To avoid hardware dropping into mirror cavity
stuff a small cloth under hardware! Item (A)
3.
Remove hardware holding front panel in place. Repeat on
opposite side.
Attention
Note:
Special notes and cautionary measures which
can prevent damage to the accessory or
motorcycle.
Tips for facilitation of operation,control and
adjustment, as well as maintenance work.
VStream
TM
Windscreen
Installation and Owner’s Manual
N20012A and N20012 for
Honda GL1800
Quantum Coated polycarbonate
Page 1 of 3
©2008 National Cycle, Inc. PO Box 158, Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / e mail: info@nationalcycle.com
10-118538-000 10/08
Figure 1
Figure 2
A
